KEKET™ Biodegradable Descaler
Industrial Acid-Based Descaling Solution for Mineral Scale, Rust and Inorganic Deposit Removal
FROM CHAOS TO CONTROL.
Born from Kemet. Engineered for Industry.
Product Overview
KEKET™ Biodegradable Descaler is an industrial acid-based descaling solution developed under the KEKET™ Industrial Chemicals brand by TSH Tech LLC.
The product is formulated for the removal of mineral scale, rust and inorganic deposits from industrial equipment and water-handling systems, including cooling systems, heat exchangers, boilers, condensers, pipelines and circulation networks.
Mineral deposits can accumulate inside industrial equipment, restricting water circulation, reducing heat-transfer efficiency and increasing maintenance requirements. KEKET™ Biodegradable Descaler is designed to support the removal of these deposits during controlled industrial maintenance and descaling operations.
The formulation described in the product’s technical documentation combines an acid-based descaling system with biodegradable additives. The product is supplied as a dark liquid that is fully soluble in water and intended for dilution before application.
Key Features & Benefits
Industrial Mineral Scale Removal
Designed to remove mineral scale and inorganic deposits from compatible industrial equipment and water-treatment systems.
Rust and Deposit Removal
Formulated for descaling applications involving rust and accumulated inorganic deposits on equipment surfaces.
Heat Transfer Efficiency
Removing scale from heat-transfer surfaces can help restore equipment efficiency where mineral deposits have restricted thermal performance.
Water-Soluble Formulation
The product is fully soluble in water, supporting the preparation of diluted solutions for industrial descaling procedures.
Biodegradable Additives
The formulation incorporates biodegradable additives as described in the technical documentation. Biodegradability of the complete finished product remains subject to verification.
Industrial Maintenance Support
Designed for use during scheduled maintenance, equipment servicing and industrial descaling operations.
Industrial Applications
Cooling Water Systems
KEKET™ Biodegradable Descaler is intended for mineral scale removal in compatible industrial cooling-water systems and associated circulation equipment.
Heat Exchangers
Suitable for consideration in controlled descaling procedures involving heat-transfer surfaces affected by mineral deposits.
Boilers & Condensers
Intended for industrial descaling applications involving compatible boiler and condenser equipment, subject to material compatibility and operating requirements.
Pipelines & Circulation Systems
Designed for the removal of accumulated mineral deposits from compatible industrial piping and circulation networks.
Industrial Water Treatment
Supports maintenance-related descaling operations involving water-treatment infrastructure and process equipment.
Industrial Maintenance Operations
Intended for planned equipment servicing where mineral scale, rust or inorganic deposits affect industrial system performance.
Technical Specifications
| Property | Technical Information |
|---|---|
| Product Name | KEKET™ Biodegradable Descaler |
| Product Code | TSH-TDS-KK-BD-001-2026 |
| Product Category | Industrial Acid-Based Descaling Solution |
| Physical Form | Liquid |
| Appearance | Dark Liquid |
| Odour | Roasted Almond |
| pH | 1.0–1.2 |
| Specific Gravity | Approximately 1.045 |
| Solubility | Fully Soluble in Water |
| Boiling Point | Approximately 101°C |
| Flammability | Non-Flammable |
| Primary Application | Mineral Scale, Rust and Inorganic Deposit Removal |
| Dilution | 1:5 with Water, as Stated in the TDS |
| Circulation Time | 1–2 Hours |
| Packaging Options | 25 L, 200 L, IBC and Bulk |
| Stated Shelf Life | 3 Years Under Recommended Storage Conditions |
| Brand Owner | TSH Tech LLC |
| Brand | KEKET™ Industrial Chemicals |
The values above are taken from the existing product TDS and require confirmation against the final production formulation. Material compatibility, application suitability and safety classification must be established before industrial use.
Dilution & Application
KEKET™ Biodegradable Descaler is intended for use in controlled industrial descaling operations.
The existing Technical Data Sheet specifies a typical dilution of 1:5 with water, with circulation through the affected system for approximately 1–2 hours, followed by thorough rinsing with clean water.
Neutralisation of the spent solution may be necessary before disposal or discharge, depending on its condition and applicable environmental regulations.
These figures are documented application guidelines, not independently validated operating instructions. The final procedure must account for the scale composition, equipment materials, operating conditions and applicable site safety requirements.
Do not use these preliminary instructions for field application until the final SDS, equipment compatibility and operating procedure have been approved.
Handling & Storage
The existing product documentation specifies storage in sealed containers in a cool, dry and well-ventilated location.
Keep the product away from incompatible materials, including alkalis and oxidising agents.
Appropriate chemical-resistant protective equipment, including gloves and eye protection, should be used during handling.
The final Safety Data Sheet must be reviewed before transportation, storage or industrial application.
Product Quality & Technical Documentation
KEKET™ Industrial Chemicals is committed to developing specialised chemical solutions for demanding industrial environments.
The product documentation includes a Technical Data Sheet and Safety Data Sheet covering product identification, physical properties, handling considerations and intended industrial applications.
Final commercial documentation will be aligned with the confirmed formulation, verified hazard classification, material compatibility and applicable regulatory requirements.
Packaging & Supply
The existing TDS identifies the following packaging options:
- 25-litre containers
- 200-litre drums
- Intermediate Bulk Containers (IBC)
- Bulk supply
Packaging availability and commercial supply arrangements are subject to confirmation.
Technical & Commercial Enquiries
For industrial descaling requirements, technical discussions and product enquiries, please contact:
Email: info@tshtech.us
Telephone: +1 302 522 3069
KEKET™ Industrial Chemicals
A Brand of TSH Tech LLC
Part of TSH Group of Companies
200 Continental Drive, Suite 401
Newark, Delaware 19713
United States
KEKET™ — FROM CHAOS TO CONTROL.
Born from Kemet. Engineered for Industry.